WiFi Booster Plusnet (Beginner Friendly)

WiFi Booster for Plusnet. We are often asked how to boost WiFi with WiFi booster PlusNet units.

We have a few units that we can recommend which you will find further on in the article.

Why is the search query “WiFi booster PlusNet” trending all the time?

These units are inexpensive and reliable, which is why they are so popular with Plusnet users and anyone else that wants to expand their WiFi coverage without spending too much.

Let’s look into this, and find out more about Plusnet WiFi boosters.

Table of Contents

Plusnet WiFi Booster

How can I boost my Plusnet WiFi signal?

If you use a Plusnet router with an ADSL, fibre or cable broadband connection, you may notice that the Internet is not always as speedy and reliable as you would like. The reason for this is that your network doesn’t have a WiFi Booster, which is a small device connected to your router that you can use to boost your Internet range.

This is achieved by adding more WiFi access points, or WiFi boosters to your Plusnet WiFi network. However, to do this you will need to know the exact location of your WiFi booster PlusNet unit.

There are many WiFi boosters that are compatible with Plusnet, but there are only a few that work well enough to give you a decent internet experience. Look at the units in the below table to see which ones we recommend.

[amalinkspro_table id=”4455″ new-window=”on” nofollow=”on” addtocart=”off” /]

Do WiFi boosters make your WiFi better?

So, what is a WiFi booster? Simply put, it’s a device that improves the signal quality of your WiFi network. For example, a WiFi booster can boost a weak WiFi signal to a strong one. This helps in providing a better connection and improves the performance of your WiFi network. PlusNet WiFi boosters can be bought from retailers like Amazon.com and eBay. 

The most important thing to consider when buying a WiFi booster is whether it will work with your Plusnet router. This is because the WiFi booster will work by connecting to your router using the same WiFi network as your router. If your router has week signal WiFi booster then you will need to buy one separately.

To summarize, you need a WiFi booster that will work with your router to get a stronger signal and improve your WiFi experience. You can’t just pick up any WiFi booster that looks like it might work, because you want to make sure that it’s compatible with your Plusnet router. 

How can I increase my WiFi signal strength?

As has been noted in the above section, boosting your WiFi signal can help improve your internet performance. To boost your WiFi signal you need a WiFi booster that works with your router. The best WiFi boosters for Plusnet will boost your WiFi signal, but will also boost other WiFi signals, so you need to make sure you don’t have any other devices on the same WiFi network.

It’s important to check whether your router can support WiFi boosters before buying one. This is because WiFi boosters are designed to boost your Internet connection, not any other devices connected to your router. We would recommend buying a WiFi booster that has a maximum range of about 20 meters or less.

Why is Plusnet WiFi so bad?

Plusnet can’t really be singled out as having particularly bad WiFi, and this is for a few reasons. The first reason is that broadband routers generally have less than perfect WiFi capabilities to reduce costs, and to cater for audiences that have less expectations from their hardware that may have come for free as part of an internet package. 

The second reason is that the majority of UK consumers do not have access to a business grade WiFi router in their homes. Therefore, it’s unlikely that most people will have the luxury of choosing what they want from their WiFi network. Instead, it will be the ISP that will decide what equipment is available to consumers, and how the ISP has decided to implement their network infrastructure is up to them.

That said, there are some issues with Plusnet WiFi that can affect your experience with the service.  The easiest and cheapest method is to use a WiFi booster for a quick win, however there are also many great mesh WiFi systems that you can try if you have a larger home, or more demanding users that need better WiFi that can take full advantage of your Plusnet broadband.

[amalinkspro_table id=”4426″ new-window=”on” nofollow=”on” addtocart=”off” /]

How to Boost Your WiFi Signal in 3 Simple Steps

The key factor is signal strength or signal when in relation to your proximity to or distance from your WiFi router.

If you notice that your signal gets worse and weaker as you get further away from it, then you have a signal strength issue. This could be due to a number of factors, so we’ll go through some solutions below.

On the other hand, if your WiFi works when you are in the same room as your modem but signal strength decreases when you move to a different room within your home then this is due to interference and proximity. 

There are several key factors that will affect your overall WiFi experience where a WiFi booster Plusnet could help. We list these issues below.

Factors That Affect Your WiFi Signal Strength

1. Distance from your router The first thing to do is check your WiFi signal by opening up your WiFi network management software (e.g. Netgear Genie) and check your connection quality. If you see a message about a weak signal, this is usually due to a lack of signal strength.

You should also be able to see what device is closest to your router (for example, your laptop, smart phone, or tablet), and you can use this to help identify the source of your issue. If you are unable to connect to the WiFi, or get a low quality connection, then you may need to move closer to the router or add a WiFi booster to help boost your WiFi signal. If this is the case, we would recommend adding a WiFi booster if you have the option.

2. Your Router’s Settings There are three main settings that will affect your WiFi signal: 

Range – this is the maximum distance that your WiFi signal can travel before it drops below an acceptable level. This is measured in dB. The higher the dB, the further the signal can travel. A good benchmark is to look at other WiFi signals in your area and try to match their range. We have a full guide on how to increase the range of your WiFi for Virgin Media here, but in short, you will want to make sure that your router has the best possible settings for the area that you live in.

Security – this is how secure you router is, and should be set to the highest level that you are comfortable with. 

Protocol – this is the type of wireless technology that your router uses. Most modern routers support both

11a/b/g/n and newer versions (

11ac) that can provide faster speeds. You should ensure that you have the latest version of your router.

Interference – This is where interference comes into play. The more devices that are using the same WiFi channel, the less bandwidth you will get. This is usually caused by either having a lot of wireless devices in your home (e.g. TV’s, tablets, smart phones, etc.) or having a laptop on your desk that is streaming video. If your WiFi works fine when there is only one device in the house, then it’s most likely to be an interference issue.

1.Thus, if your WiFi signal is strong when there is only one device connected, then it’s likely due to interference.

2. Wireless Security and WPA2-PSK Mode – this is where we come back to the security settings of your router. Most routers are set to WPA2-PSK by default. This is the best option, as it uses encryption to secure your connection. However, WPA2-PSK is not compatible with all devices, and the newer versions of WPA3-TKIP.

Conclusion: Boost Your Plusnet WiFi signal

WiFi is a ubiquitous service that everyone needs to connect to the internet with mmodern wireless devices. We have looked at some of the basic factors that will affect the quality of your WiFi connection, but if you are still having problems with your Plusnet WiFi signal, then we have a few tips that you can try to boost your signal.

1. WiFi positioning 

2. Set your router to the highest range setting

3. Use WPA2-PSK for your security mode

4. Add a WiFi booster if you can

5. Remove other devices from your WiFi network

6. Use a different WiFi channel

7. Try a different router

8. If none of these work, there are other options that you can try to improve your WiFi experience.

We hope that this has been helpful, and that you can find the answer to your WiFi booster Plusnet issues.

Was this helpful?

Thanks for your feedback!
Skip to content